Available in | Reverse Cycle - 2.5kW, 2.6kW, 3.5kW, 5.0kW, 5.2kW, 7.1kW |
Refrigerant | R32, R410A |
Download our warranty card to read about our 3 year warranty
View Warranty InfoThe room temperature can be set to go no lower than 10°C, thus ensuring that the room does not get too cold when not occupied.
With All DC, electricity loss is decreased and power consumption reduced.
Should there be a temporary loss of power, the unit will automatically restart itself in the same operating mode, once the power is restored.
The unit automatically switches between operating modes based on the temperature setting and room temperature.
The position of the louvres is set automatically to match the operating mode. It is also possible to adjust the louvres using the remote control.
Corrosion-resistance of the heat exchanger in coastal areas has been improved by blue fin treatment of the outdoor unit heat exchanger.
This product is designed to be compatible with Air Conditioning Demand Response program. When your electricity supplier activates one of the three modes the air conditioner switches over to the appropriate operation.
Limits the maximum operation current, and performs operation with the power consumption suppressed.
Fresh air can be taken in by a fan which can be connected using an external control unit.
i-PAM inverter technology enables high output and high efficiency performance.
The air filter has been treated to resist mildew growth, thus allowing cleaner use and easier care.
ON-OFF timer can be set to operate once every 24 hours.
This timer allows selection of one of four options. ON, OFF, ON ––> OFF, or OFF ––> ON.
The indoor unit’s intake grille can be removed for easy cleaning and maintenance.
The micro-processor gradually changes the room temperature, allowing you to sleep comfortably at night.
The indoor units fan can operate at a low speed to produce quieter operation.
v-PAM inverter technology increases the maximum output of the compressor significantly and enables high power and high efficiency.
Dust that accumulates on the air conditioner can be easily cleaned with a damp cloth.
Different ON-OFF times can be set for up to 7 days.
Weekly + setback timer can set temperature for two time spans and for each day of the week.