Smart Climate Control

Click here to view the myanywAiR Next User Manual.pdf

For detailed instructions on how to install myanywAiR Next click here

myanywAiR Next makes your smart heat pump / air conditioner even smarter.

At home or on the go, your home climate is now at your fingertips.

The myanywAiR Next app allows you to control your heat pump / air conditioner through our dedicated app from anywhere in the world and helps you save a significant amount of energy.

Integrates seamlessly with Alexa and Google Home for an optimal smart home experience.

The anywAiR technology Wi-Fi adaptor II is inserted into your Fujitsu heat pump / air conditioner. Once connected to Wi-Fi, it lets you control your heat pump / air conditioner with an app from anywhere in the world.

With myanywAiR Next you can:

❄ Control your heat pump / air conditioner from anywhere in the world through the app.

• myanywAiR Next connects to the Wi-Fi network and remains inserted in your Fujitsu heat pump / air conditioner. The app is installed on a phone and as long as you have a Wi-Fi connection you can send a command to the heat pump / air conditioner through the app.
• The app is connected to Wi-Fi anywhere in the world -> sends a command via the myanywAiR Next that’s connected to the Wi-Fi network -> myanywAiR Next sends an infrared signal to the heat pump / air conditioner.

❄ 7-day scheduling and timers - Schedule events in advance.

• Schedule for 24 hours ahead.
• The timer is short-term, for less than 24 hours, even a few minutes.

❄ Save energy and reduce your electricity bills - The combination of location awareness that will trigger the heat pump / air conditioner off when the last person leaves, the ability to remotely control the heat pump / air conditioner from anywhere, 7-day Scheduling, Reminders to clean the filter, Climate React mode that will trigger the heat pump / air conditioner to maintain the temperature and trigger the heat pump / air conditioner to turn off and on according to set points.

❄ Monitor the temperature and humidity in real time.

• The myanywAiR Next app will indicate the current temperature in the room; as well as the current heat pump / air conditioner state.
• The temperature and humidity sensor is located in the Fujitsu unit.
• The humidity reading is a calculation and not absolute reading.
• Climate React mode will trigger the heat pump / air conditioner according to the measured temperature from the Fujitsu unit.

❄ Automatically turns on when you arrive and turns off when everybody leaves.

• Location Awareness feature. After setting up the location the Location Awareness can be set to turn the heat pump / air conditioner ON and OFF upon arrival or departure.
• The minimum range is 100 meters and is set for both exit and entry, although we suggest a larger range.
• The mode will turn the heat pump / air conditioner ON according to the last setting the heat pump / air conditioner was ON. This includes the Swing setting the heat pump / air conditioner was ON.

❄ Reacts automatically to temperature and humidity.

• Climate React is a bit like a thermostat. myanywAiR Next can be programmed through the app and web app to change the temperature according to the measured temperature, humidity, or a combination of the two called Feels Like.
• Two set points may be set in order for myanywAiR to trigger the heat pump / air conditioner into action when a temperature is below and above 2 set points.
• Only one profile may be set.

❄ Share your device with other people (family, co-workers, friends).

• Users can share and unshare.
• You may associate up to 15 myanywAiR Next devices to a single myanywAiR Next user account.
• Each myanywAiR Next device will appear on the app for the myanywAiR Next user account. For example, you can have 15 myanywAiR Next devices associated with a single myanywAiR Next user account. All 15 myanywAiR Next devices will appear in the myanywAiR Next user account's app.
• Each myanywAiR Next user account can share a single myanywAiR Next device with as many users as needed.
• Each Sensibo user account will only be able to see the myanywAiR Next device that was shared with them. The person who receives the sharing invitation will only be able to control the specific device that was shared with them.
• Each myanywAiR Next device has one admin. The admin is the myanywAiR Next user account that had opened the account.

❄ Works with Google Home/Assistant and Amazon Echo (Alexa), and more.

How to reset the password for my myanywAiR Next account

To reset the password to your myanywAiR Next account follow this link: anywair-home.sensibo.com

You will need to reset the password in these instances:

• You changed your network Wi-Fi name
• You changed your network Wi-Fi password

1. Select "HELP" to access the Wi-Fi set-up wizard.

2. Select "Reset Wi-Fi settings" to continue.

3. Select your remote.

4. The Wi-Fi connection will open.

5. Hold the "Send" button for 5 seconds until you see "Ln" and the number "1".

6. Press the power button and you will see "01" displayed on the screen.

7. Point your remote at the heat pump / air conditioner and press the power button again to set your heat pump / air conditioner into reset Wi-Fi mode.

8. After scanning, you will be prompted to select the Wi-Fi network and password.

Manually Resetting Wi-Fi

If this fails there is a manual method for resetting Wi-Fi.

Step 1. Remove the device for 3 seconds

Step 2. Plug in the device

Step 3. Repeat 5 times and you will see the Wi-Fi LED on the heat pump / air conditioner unit blinking once steadily.

Set a recurring failsafe timer that will deactivate your heat pump / air conditioner even if you forget to do so.

Swipe up to open the device menu and select Auto Off

Select how long your heat pump / air conditioner should remain on before automatically turning off

Your heat pump / air conditioner will not shut off automatically according to the selected time

You can set a timer to turn your heat pump / air conditioner on. To do so open your settings drawer by swiping up.

Press "timer" and select when you wish to turn OFF the heat pump / air conditioner.

Your heat pump / air conditioner will turn on when the timer finishes.

You can view Hourly and Daily Graphs by swiping up the settings drawer and by pressing Graphs and Logs

You then can view temperature and humidity, TVOC, CO2, and outside pollution graphs by pressing on the icons. Swiping left and right on the graph itself will allow you to view specific times as well as the event log at the bottom of the screen.

To set the Climate React mode, do the following:

1. Enter the device you wish to activate Climate React on

2. Swipe up to open the drawer and press "Climate React"

3. Select your Climate React trigger (Temperature, Humidity, or Feels like)

4. Lastly, select the on/off temperature, humidity, or feels like range, and heat pump / air conditioner state for each trigger

To begin, swipe up on the device menu to open the settings drawer and select "Share Device / Manage Users"

As the owner of the device you have the ability to:

1. Share the device
2. Transfer ownership
3. Set minimum and maximum temperatures for cooling and heating
4. Restrict shared users from doing anything other than changing the heat pump / air conditioner state or sharing the device
5. Remove device access

To share the device do the following:

1. Click the device you want to share

2. Slide up to open the device settings drawer and select "Share"

3. Share directly with someone in your recent contacts or select which medium to share the device (SMS, WhatsApp, Email, Facebook, Twitter, Slack, etc.)

4. The recipient should install Sensibo, sign up, or log in and only then click the link.

5. To remove a user select "remove" next to the users name.

Once you have downloaded the myanywAiR Next app from the App Store or Google Play, it's time to install your anywAiR technology Wi-Fi adaptor II into your Fujitsu heat pump / air conditioner.

1. Open the app, press "Sign Up" and create your account, or if you already have a myanywAiR Next account press "Sign in"

2. Select “add device” and select "myanywAiR Next" to get started

3. Lift open the front panel of your Fujitsu heat pump / air conditioner and insert myanywAiR Next into the USB port

*If the device is not automatically found, press "Retry". Having trouble?... Locate the QR code on the back of the myanywAiR Next device and either scan it or enter the code manually.

4. Once the device is found, press the power button on your physical remote control twice, slowly. If the device is not found press "Retry"

If you have any questions or if you require assistance reach out to us at [email protected].

* Installation for Fujitsu General Lifestyle range only.

myanywAiR Next offers an open API!

Please follow this link for the API documentation site: https://anywair-home.sensibo.com/

You can generate an API key from the webapp at https://anywair-home.sensibo.com/me/api

Google Home / Google Assistant

Once you have added myanywAiR Next to Google Home or Google Assistant, you will be able to use voice commands to control your heat pump / air conditioner.

Example phrases:

• Ok Google, turn on the living room A/C
• Ok Google, turn on the thermostat
• Ok Google, turn off the bedroom A/C
• Ok Google, turn off the thermostat
• Hey Google, increase the temperature in the bedroom A/C
• Ok Google, set the temperature in the bedroom A/C to 25°
• Ok Google, set living room A/C to cooling
• Ok Google, set thermostat to cooling
• Ok Google, set living room A/C to heating
• Ok Google, set thermostat in living room to heating
• Hey Google, what is the living room A/C set to?
• Hey Google, what is the temperature in the living room A/C?

To connect myanywAiR Next to Amazon Echo (Alexa): 

1. Go to your Alexa app (sign in if necessary).

2. Go to 'Smart Home' and search for the Sensibo Skill then click on 'enable to use'.

3. You will be redirected to myanywAiR Next to 'authorize'. You will be prompted to enter your myanywAiR Next username and password.

4. Your myanywAiR Next account will link to Amazon Echo (Alexa) and you can now run 'Discover devices'.

5. Once linked, your myanywAiR Next devices will appear under 'Smart Thermostats'.

You're good to go!

myanywAiR Next acts as a thermostat device. Here are a few examples of usage:

*You may use the word 'thermostat', 'air conditioner', or 'a/c'. 

• Turn on Living Room
• Turn off Living Room
• Set temperature in Living Room to 25 degrees
• Increase temperature in Living Room (by X degrees)
• Decrease temperature in Living Room (by X degrees)
• What is Living Room set to?
• What is the temperature in the Living Room?
• Set Living Room to Heat / Cool / Auto

Please note: In order to send commands to Amazon Echo (Alexa), you must first turn on your A/C.

For example:

- Alexa, turn on Living Room A/C

- Alexa, set living room to Cool

- Alexa, set temperature to 25 degrees

*You cannot set the mode or temperature without asking Amazon Echo (Alexa) to turn the heat pump / air conditioner on first.

Currently, Amazon Echo (Alexa) does not support changing the Fan level with myanywAiR Next.

If you change your router you will notice the following blinking pattern on your Fujitsu unit. If the network name and password remains the same, myanywAiR Next should reconnect automatically.

If myanywAiR Next doesn't reconnect automatically or if you have changed the network name and/or password, or if you have transferred ownership, you will need to reconnect myanywAiR Next via the myanywAiR Next app.

1. Select "HELP" to access the WiFi set-up wizard.

2. Select "Reset Wi-Fi settings" to continue.

3. Select your remote.

4. The Wi-Fi connection will open.

5. Hold the "Send" button for 5 seconds until you see "Ln" and the number "1".

6. Press the power button and you will see "01" displayed on the screen.

7. Point your remote at the heat pump / air conditioner and press the power button again to set your heat pump / air conditioner into reset Wi-Fi mode.

8. After scanning, you will be prompted to select the Wi-Fi network and password.

Manually Resetting Wi-Fi

If this fails there is a manual method for resetting Wi-Fi.

Step 1. Remove the device for 3 seconds

Step 2. Plug in the device

Step 3. Repeat 5 times and you will see the Wi-Fi LED on the heat pump / air conditioner unit blinking once steadily.

You can always set up the Wi-Fi profile manually. Here's how:

1. On your computer/laptop, open your Wi-Fi setting and connect to the ANYWAIR-I-XXXXX network. The network does not have internet access, so continue without internet access for the duration of the setup.

2. Open a browser window and enter the address http://192.168.4.1 A new window will open.

3. Enter your Wi-Fi network name and password. *Please note that it is case-sensitive.

4. Click 'Configure Wi-Fi'

5. Your heat pump / air conditioner unit's Wi-Fi light should start blinking until it will stop. Once it stops, you are connected.

6. Select your Wi-Fi network from the drop-down list and then enter the password for your Wi-Fi network.

7. Click 'Configure'.

8. A notification will appear - "Wi-Fi Credentials Saved"

myanywAiR Next is now connected to your Wi-Fi network.

Here are some of the best practices to help improve Geofence accuracy.

1. myanywAir app permission: Make sure the Location/Geofence setting is turned on.

2. Location: Set it to "Always On" to ensure accurate geofence triggering.

3. Location Accuracy: Set it to "High" for better results.

4. Wi-Fi: Ensure that your Wi-Fi is turned on. Geofence will not work in aeroplane mode either.

5. Battery: Optimise the app settings to prevent it from being restricted.

6. Power Saving Mode: Make sure it is turned off as it can interfere with geofence functionality.

7. Avoid Task Manager Apps: These apps may interfere with the smooth running of background processes, such as geofence triggering.

8. Increase Geofence Radius: Try increasing the radius to 2 KM or 1.2 Miles.

9. Newer devices put applications to sleep if they haven't been opened in a while. It is difficult to determine if your device has a setting for this or not. You will have to look through your phone settings to check this. For example, the latest Samsung devices use the Smart Manager to put our app to sleep.

If the issue persists, please let us know, and we will be more than happy to provide further assistance.

If you are experiencing an issue, you have the ability to "report an issue" via the myanywAiR Next app. This will open a Support ticket and provide our engineers with a log report that assists in determining the issue you are reporting. In order to report an issue:

1. Open the myanywAiR Next app and press the three horizontal bars on the top left-hand corner of the app

2. Select "Report an issue"

3. Describe your issue and press "report"

A Support Agent will reach out once the reported issue has been reviewed.

To begin, swipe up on the device menu to open the settings drawer and select Share Device / Manage Users

As the owner of the device you have the ability to:

1. Share the device
2. Transfer ownership
3. Set minimum and maximum temperatures for cooling and heating
4. Restrict shared users from doing anything other than changing the heat pump / air conditioner state or sharing the device
5. Remove device access

View your weekly and monthly usage including weekly triggers events as well as monthly usage compared to the previous year as well as the local average.

Swipe up to open the settings drawer and select statistics

View your weekly and monthly usage statistics

Set a recurring failsafe timer that will deactivate your heat pump / air conditioner even if you forget to do so.

Swipe up to open the device menu and select Auto Off

Select how long your heat pump / air conditioner should remain on before automatically turning off

Your heat pump / air conditioner will not shut off automatically according to the selected time

Gain valuable insight into your monthly heat pump / air conditioner usage which in turn will help you calculate your heat pump / air conditioner power consumption.

Single-room air conditioners of different sizes use between 500 to 1500 watts. The average central heat pump / air conditioner system, on the other hand, will use about 3000 to 5000 watts of electricity.

Now it’s time to calculate your heat pump / air conditioner's energy consumption:

1. To calculate the electricity cost of your heat pump / air conditioner, multiply the electricity consumption or the kilowatt per hour (kWh) by your tariff rate (i.e. 30 cents/kWh).
2. To get the energy consumption (kWh), simply multiply your heat pump / air conditioner wattage (kW or W) by the number of hours you use.
3. For example, if you are using a 300W heat pump / air conditioner for 4 hours per day, then you are consuming about 1200Wh or 1.2kWh per day. In one month, the consumption cost will be 1.2kWh x 30 days x 0.30 $/kWh) = $10.80.

Your myanywAiR Next-powered smart heat pump / air conditioner  is capable of so much more than just a convenient mobile app. myanywAiR Next Optimus is constantly surveying your heat pump / air conditioners’ performance and room climate to provide you with actionable insights. By using machine learning methods and other advanced algorithms, Optimus is able to detect various issues with your system and suggest how to fix them or direct you to consult a professional.

AI-Powered Insights

Using data mining Optimus learns the ins and outs of your room, how long it takes to heat or cool to the desired temperature, and the efficiency of your heat pump / air conditioner. Combined with other sensory information from the device and external info such as the weather, Optimus can detect when something is amiss. For example, a window has been left wide open, or your heat pump / air conditioner is set to a lower temperature than necessary resulting in wasted energy. Optimus will also suggest you power off your heat pump / air conditioner  when outdoor temperatures are comfortable.

Anomaly Detection

Is your AC cooling efficiently? Optimus suggests the optimal temperature for efficient heat pump / air conditioner  operation saving you money.

Weather Optimisations

Optimus helps you save energy by alerting you to turn off your heat pump / air conditioner  when temperatures outdoors are cool.

Open Window Alerts

myanywAiR Next alerts you when Optimus detects an anomaly regarding your heat pump / air conditioner  environment based on your historic data.

Get more out of Climate React by combining it with Scheduling and Geofencing...

Set Climate React with Schedule

Get more out of Climate React by scheduling when you want Climate React to automatically maintain the room at exactly the temperature you want.

1. Swipe up to open the settings drawer and tap Schedule	2. Select a schedule or tap the "+" icon to create a new schedule	3. Add a new schedule and check Schedule Climate React

Set Climate React with Geofencing

Have geofencing trigger Climate React for you so you don't have to think twice about controlling the heat pump / air conditioner when you enter or leave.

1. Swipe up to open the settings drawer and tap Geofencing	2. Turn on/off Climate React

Collect detailed weekly and monthly graphs and events...

With myanywAiR Next Plus, view weekly and monthly graphs to better understand performed actions, triggers, and historical data.

Weekly	Monthly

Get real-time weather and air quality information...

myanywAiR Next will notify you when the weather is nice so you can turn off the heat pump / air conditioner

When the weather is nice, myanywAiR Next will send you a notification to your phone so you can open a window and turn the heat pump / air conditioner off.

myanywAiR Next will also alert you when the air quality is unhealthy so you can close the windows

If the pollution levels in your area are high, myanywAiR Next will let you know so that you can close the windows and keep a healthy indoor environment.

To subscribe

1. Open the myanywAiR Next app and select the 3 horizontal bars on the top left-hand corner of the app to open the menu

2. Select "myanywAiR Next Plus" from the menu

3. Choose from either the monthly or yearly plan and subscribe!

To unsubscribe

The myanywAiR Next Plus subscription is managed via the relevant store - either App Store or Google Play. To unsubscribe, enter the store, view your subscriptions, and select "Cancel Subscription".

*Please note, if you subscribed to the yearly subscription on January 1st (for example) and decide to cancel the subscription on April 1st, you can still access your subscription until January 1st of the following year, and you will not be refunded the difference by the App Store of Google Play.

Packed with features to keep you cool, your energy bill low, and the air you breathe fresh, myanywAiR Next PLUS makes use of advanced AI algorithms and machine learning, offering increased automation, optimisation, data & heat pump / air conditioner performance anomaly detection.

Benefits of myanywAiR Next Plus include:

• Extended graphs and logs
• Climate React scheduling
• Weather and pollution updates and notifications
• Open window detection
• Heat pump / air conditioner usage and statistics
• Auto Off Energy Saver
• Coil Dry
• Advanced user management