Take control. Controller options.
This range is compatible with the following controller options.
Type | Multi System |
Available in | Reverse Cycle - 2.5kW, 3.5kW, 5.0kW |
Refrigerant | R410A |
The room temperature can be set to go no lower than 10°C, thus ensuring that the room does not get too cold when not occupied.
With All DC, electricity loss is decreased and power consumption reduced.
Should there be a temporary loss of power, the unit will automatically restart itself in the same operating mode, once the power is restored.
The unit automatically switches between operating modes based on the temperature setting and room temperature.
Corrosion-resistance of the heat exchanger in coastal areas has been improved by blue fin treatment of the outdoor unit heat exchanger.
Systems are capable of attaching a field-supplied branch ducts distributing the airflow.
Limits the maximum operation current, and performs operation with the power consumption suppressed.
Select appropriate intervals for displaying the filter sign on the indoor unit according to the estimated amount of dust in the air of the room.
i-PAM inverter technology enables high output and high efficiency performance.
ON-OFF timer can be set to operate once every 24 hours.
This timer allows selection of one of four options. ON, OFF, ON ––> OFF, or OFF ––> ON.
The micro-processor gradually changes the room temperature, allowing you to sleep comfortably at night.
The indoor units fan can operate at a low speed to produce quieter operation.
The up/down louvre automatically swings up and down.
v-PAM inverter technology increases the maximum output of the compressor significantly and enables high power and high efficiency.
Dust that accumulates on the air conditioner can be easily cleaned with a damp cloth.
Different ON-OFF times can be set for up to 7 days.
Weekly + setback timer can set temperature for two time spans and for each day of the week.