Multi-Room systems
home mrs
Multi Room Systems - Heat or cool 2, 3 or 4 rooms from only one outdoor unit.

The choice of systems allows a wide variety of 2, 3 or 4 indoor units to be connected to just 1 outdoor unit and you can tailor your own combination of hi wall, floor console, cassette or bulkhead to best suit each room. Our product range include 5 indoor unit types spanning 12 models ranging in capacity from 2.0kW to 7.0kW. With such a diverse choice of options there is a combination to suit most homes or small businesses in New Zealand.

 
  • Fujitsu MultiRoom System
  • Controller & Options


    Independent Control
    Each indoor unit can be operated independently. This means that on / off, temperature, air movement, and time / clock operation can all be controlled from their own controller. (The multi system cannot be operated in heat and cool mode simultaneously).


    Flexible installation
    Fujitsu Multi systems can be installed in large buildings and over multiple floors due to the long maximum allowable pipe length.

    Maximum Pipe length
    (each unit):
    25m (AOTG24LAT3/30LBTA4)
    Max. Height:
    15m (AOTG24LAT3/30LBTA4)
    Total Piping Length:
    50m (AOTG24LAT3)
    4 Outdoor Units 70M (AOTG30LBTA4)


    Innovative technology

    High efficiency / low noise large fan
    Newly designed fans have been used to increase airflow efficiency, at the same time as significantly reducing sound pressure

    Heat exchanger
    A new 3 row heat exchanger has been used which allows for a more compact outdoor unit with higher energy efficiency.

    DC fan motor
    High performance and high efficiency has been achieved by using a new smaller DC Fan Motor.

    High efficiency DC Twin Rotary Compressor
    A high performance, low noise, large capacity DC Twin Rotary Compressor is used.

    10˚C heat operation
    Each indoor unit can be operated independently. This means that on / off, temperature, air movement, and time / clock Operation starts and maintains the room temperature at 10˚C when the temperature drops below 10˚C.


    Economy operation
    By maintaining a slightly higher temperature in cool mode, lower temperature in heat mode and limiting the maximum current draw real energy savings are achieved

Fujitsu dark logo
YouTubeFacebook